John I Posted January 10, 2020 Share Posted January 10, 2020 Hi folks, I know it's nearly 10 years since Nick C did his DIY head post. Did anybody manage to get a copy of the inlet profile section drawings which appear on page 3 of the post. I read that it had been suggested they be transposed to enable templating. I am about to embark on DIY head improvements and I want to check no work has already been done and ensure I don't find water! cheers John I Link to comment Share on other sites More sharing options...
Nick Jones Posted January 10, 2020 Share Posted January 10, 2020 Presume you mean the Neil Collingwood thread...... not my later interpretation...... I don't think that that sketch ever went any further but all the info you need is right there. Just save the pic to your desktop and reopen in a pic viewer so you can zoom it until the tape measure on the screen matches your ruler - then lay a bit of thin paper over it and trace gently with a felt tip (for the sake of your screen!). Alternatively your could print it at various zooms until you hit the right measurements, but might waste a bit of paper. Link to comment Share on other sites More sharing options...
John I Posted January 10, 2020 Author Share Posted January 10, 2020 Hi Nick, thanks yes I did mean Neil C. Talk about cross pollination in the brain, I can't even blame predictive text as I've turned it off and I haven't had a drop yet. Though will change shortly. Apologies to Neil. john Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now