Search the Community
Showing results for tags 'bearings'.
Found 3 results
-
Hi Hyptethically speaking how much punishemnt can a standard bottom end take before -
One of my front hubs shows play even with new bearings fitted. Are alloy hubs the only available fix?
-
Hi all, My beloved steve is currently off the road due to a slight knocking at idle (really isn't too bad but I'd rather take care of it than run it to destruction). Ive put this down to the fact that since I've had the car I've not tinkered with anything within the block just cylinder head; water pump replacement etc so there's bound to be a fair amount of wear seeing as I've had the car 2 years now and I have no record of when they were last done, if at all! So I'm just after a little advice really, Rimmer Bros page has so many I don't know what I should looking at ordering: http://www.rimmerbro...m--i-GRID007969 If anyone could shed some light on overhauling the bottom end of the engine somewhat ie things I will need would be really helpful as I'm a little lost. I presume you need to measure the crank for the correct size shells but I'm only guessing. Any help appreciated!
