foshi Posted February 21, 2022 Share Posted February 21, 2022 hi the bond i acquired came in bits gt4 getting to the point of repaint, any idea what rear screen rubber was used, was it only on the bond or other triumph models . not having much joy finding one paul. Link to comment Share on other sites More sharing options...
Escadrille Ecosse Posted February 21, 2022 Share Posted February 21, 2022 Don't know. The screen looks a bit like the GT6 but given that it predates that by a few years it won't be that. The alternative is to get some window rubber moulding and make your own. There a a couple of different profiles available that should do the job. Try these guys https://www.rubbertrim.co.uk/ Link to comment Share on other sites More sharing options...
Nick Jones Posted February 21, 2022 Share Posted February 21, 2022 Another https://coh-baines.co.uk/ Do you have the old one for comparison? Link to comment Share on other sites More sharing options...
Hamish Posted February 22, 2022 Share Posted February 22, 2022 I used these guys to find trim for my 3a hardtop you have to look at everything though as it may be listed differently to what’s fitted https://phoenixtrim.co.uk/contact-us-2-w.asp Link to comment Share on other sites More sharing options...
foshi Posted February 22, 2022 Author Share Posted February 22, 2022 problem is i have no old to compare, no idea of profile . wonder if someone has an old bit of gt6 i can try . definitely not the same as front . paul Link to comment Share on other sites More sharing options...
Escadrille Ecosse Posted February 22, 2022 Share Posted February 22, 2022 Have you a photo of the window aperture profile?? Link to comment Share on other sites More sharing options...
Nick Jones Posted February 22, 2022 Share Posted February 22, 2022 Is the screen bigger than the hole or a few mm smaller all round? Link to comment Share on other sites More sharing options...
GT6Steve Posted February 22, 2022 Share Posted February 22, 2022 A quick glance thru the Courier archives indicated that the rear glass was a custon spec for Bond Link to comment Share on other sites More sharing options...
Escadrille Ecosse Posted February 22, 2022 Share Posted February 22, 2022 3 hours ago, Nick Jones said: Is the screen bigger than the hole or a few mm smaller all round? That's the question I meant to ask Link to comment Share on other sites More sharing options...
Nick Jones Posted February 22, 2022 Share Posted February 22, 2022 37 minutes ago, GT6Steve said: A quick glance thru the Courier archives indicated that the rear glass was a custon spec for Bond Yes, and more than one as the GT4S and 2L look very different Yours is the GT4S? Good thing as the seal on that will only need one join, not 4! I reckon that once the profile is identified you could just buy a length and cut/glue as required. Looking at the blue car I reckon the profile could well be the same as the GT6 one. Give COH Baines a ring...... or failing that, someone like Dale at Moordale Motors. Link to comment Share on other sites More sharing options...
mpbarrett Posted February 23, 2022 Share Posted February 23, 2022 might be worth asking on the TSSC forum. There is a Bond specialist and a section in the mag just for Bonds. Contact details below (image from magazine PDF). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now