braided fuel hose.

[c20spit]

is all braided fuel hose suitable for fuel injection ?

[SteveA]

The Goodridge 200 series hose I intend to use is good for 1000psi, so ought to be good enough for petrol injection systems

[DaveNotSoSideways]

Yes, not all braided stuff is high pressure, generally high pressure is expensive...the 200series is the best stuff.

 

You can use hardline alloy pipe for long sections using olived goodridge connectors. The hardline pipe is 10mm O/D about £5 a per metre from Mocal. The fittings ain't cheap but less than 200series connections. So for long stretches the hardline is a winner.

[DaveNotSoSideways]

Go to think-auto and download their catalogue.

 

Also goodridge's fitting PDF shows hardline.

 

http://www.goodridge.co.uk/kit-parts/hardline.htm

 

The above shows hardline. You can link hardline to -6 connection 200series fittings, if you want hardline and flexible lines joined. All the hardline stuff is JIC6 compatiible.

[JohnD]

8mm copper pipe @ <£15/ Ten Metres.

Compression connectors from Screwfix @ £6/ten.

 

Braided?  Pah!

 

John

[c20spit]

i use copper for the majority of the car but i seem to have a problems between the injectors, the pipes not sealing well and is cracking a bit  at the ends, its only run foir about an hour.