Can anyone machine a flywheel for me?? Or have some info on someone who specialises in doing this??
Cheers
Welcome to Sideways Technologies
| Welcome to Sideways Technologies new website. We've moved the old forum onto a new server and new software. If you were previously registered, your old userid and password should still work. If it doesn't please send an email to forum "at" sideways-technologies.co.uk If you're here as a guest, your free to read and browse the forums, but we do encourage you to register. You must register if you wish to post, but don't worry this is a simple free process that requires minimal information. By registering and signing in, you can enjoy all the benefit our members do.
|
Guest Message by DevFuse
0
Machining Flywheel
Started By Craigorypeck, Jul 30 2010 02:13 PM
5 replies to this topic
#2
-
- Supporter!
- 1,246 posts
World Champion!
- LocationDorset, UK
Posted 30 July 2010 - 02:41 PM
Where are you???
#3
-
- Members
-
- 47 posts
Advanced Member
Posted 30 July 2010 - 03:14 PM
I'm in Northern Ireland. . . I'm prepared to post it.
Cant find anyone willing to do it for me, well not that I can find anyways.
Need a 9 hole cosworth flywheel machined down to a pinto size, ring gear put on and pressure plate location holes rebored.
Hoping someone willing might have an old pinto clutch assembly to mark from.
I found one machine shop that would give it a go but need all the dimensions as they dont know what they are doing. . .LOL
Cant find anyone willing to do it for me, well not that I can find anyways.
Need a 9 hole cosworth flywheel machined down to a pinto size, ring gear put on and pressure plate location holes rebored.
Hoping someone willing might have an old pinto clutch assembly to mark from.
I found one machine shop that would give it a go but need all the dimensions as they dont know what they are doing. . .LOL
#4
-
- Supporter!
- 1,246 posts
World Champion!
- LocationDorset, UK
Posted 30 July 2010 - 04:56 PM
Contact Burton Power, perhaps they could recommend someone?? Ive always found them really helpful. Also small ads in PPC mag??
http://www.burtonpower.com
http://www.burtonpower.com
#5
-
- Members
-
- 47 posts
Advanced Member
Posted 30 July 2010 - 06:00 PM
I called burton power today and asked them about a number of things I needed and they were most unhelpful!! Need my cams reground for nasp and he said they didn't do it, clearly in the catalogue and website its advertised. 2 other things I needed to discuss and was shot down straight away... Mayb got someone on their way to the toilet or somethin?? Oh well.
They do have a 9 hole pinto flywheel and with the ring gear and delivery its comin in around £250, yikes!!!
They do have a 9 hole pinto flywheel and with the ring gear and delivery its comin in around £250, yikes!!!
#6
-
- Members
-
- 29 posts
Member
- LocationNewtownards Northern Ireland
Posted 15 February 2012 - 05:24 PM
Craigorypeck, on 30 July 2010 - 03:14 PM, said:
I'm in Northern Ireland. . .
Where abouts in Northern Ireland are you ?
I am in Newtownards Co Down
I may be able to point you in the direction of some machine shops.
Tho be warned some machine shops get a bit funny about modification work.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
